A cracked screen is one of the worst nightmares for every computer user. Especially, it troubles the people who use laptops in their workplace. If the screen is damaged, you will not be able to see anything. That is why you have to opt for a computer repair shop for optimum solutions. In this case, a technician will advise you to replace the screen with a new one.
But, it is a costly process. But, there is a way through which you can fix the screen without even changing the display. Not only this, it will help you to save money but also you will get a brief idea about how the damage actually happened.
Things to Remember
Several computer experts suggest that before proceeding with the broken screen fixing process, make sure you take a chance to troubleshoot your system. It is obvious that you will not be able to see clearly. But, a try is worthy and you should go for it. In addition to that, handle your laptop very carefully, so that no further problems can occur.
Possible Reasons for the issue
There are a number of reasons that can cause the issue of a cracked screen. Some of them are pixel malfunctioning, liquid logged in the display, internal RGB congestion and other physical forces. If you cannot understand the problem, take the device to any computer repair shop expert.
They will tell you about the root cause of the problem. When the issue takes place, the display might flicker at some point. Moreover, you cannot see the pictures and the items clearly. If the issue is too serious, the display won’t turn on at all.
Replace the cracked screen
Now, it is time to get into the fixing procedure. Make sure you have gathered all the necessary tools and pieces of equipment. In addition to that, you also have to get a new screen depending upon the brand and the model number of the laptop.
These are very much necessary as without them, you will not be able to progress further. Let’s start the process without any further delay.
- Open the display bezel
Disconnect the ongoing power supply from the electrical socket. Now, remove the battery so that the device is fully out of power. Observe the front bezel of the display. There is a high possibility that it is tightened with four screws. Therefore, in order to remove the bezel, you have to loosen and open them.
After that, you will see several rubber cushions. These cushions are the support that holds the display to the screen. Remove the rubber cushions and carefully detach the bezel from the laptop display lid. If you lose any of these rubber cushions, accidentally, then you will get a new one in any computer repair shop located near your residence.
- Cable disconnection
As the display is now in your hand, open the delicate clips that are connected to it. The clips are attached to a long ribbon-like tape. There is also a thin power cable, at the back of the screen that gives power to the display, remove it gently. Keep all the items aside in a safe place. The tapes and cables are very lightweight and make sure you don’t lose them.
- Eliminate the cracked screen
Now, it is time to eliminate the faulty material from the device once and for all. The screen will automatically loosen itself from the metal frame. Depending upon the brand of laptop that you use, the frame might be made up of metal or plastic. Pick up the damaged screen and keep it by your side.
- Re-insert the new screen
Open the brand new one from the package and check it carefully for the necessary information like serial number, QR code or barcode. Just open up the outer plastic covering. If you determine any form of glitch, contact the computer repair shop. After that, seek help to place the screen on the metal or plastic panel. Make sure that it is fitted on the right part, at the front of the display.
- Reconnect the necessary cables and tapes
Now, pick up the display slowly and place it in its respective place. Attach all the cables and tapes to the correct places. Make sure that you fit them gently and correctly to avoid any type of loose connection in the future. If necessary, you might do it with the help of a pair of tweezers.
- Make the ultimate finish
Finally, pick up the screws, with the pair of tweezers, place them in the respective place. After that, tighten the screws slowly and steadily. Make sure that the bezel is perfectly placed. Fix the battery, connect the charger to the electrical outlet and turn on the laptop. You will be able to see everything clearly on the display. Dispose of the broken screen and other plastic materials in a disposable bag.
Facing Problems?
Always purchase the spare parts of a computer from a branded store that has a good reputation and product. If you are willing to buy it online, check the consumer rating and then place the order. As the entire operation needs a lot of concentration and patience, a situation might occur where you might need to seek professional help. So, what should you do now? Simply, join with a reputable service provider and fix all the errors.